Imitation FIMOR silk screen printing single layer wear-resistant squeegee (scraping) scraper 50*9*3660 65-85 degrees
Product Name: Pegasus Silk Squeegee
Product model: 50*9
Specifications: 50*9, 3.66 m / roll
Degree: 65 degrees (red) 70 degrees (white) 75 degrees (green) 80 degrees (white) 85 degrees (blue)
Shape: flat scraping
Product introduction: High quality squeegee, perfect product, excellent quality, full computer control in production process, each squeegee needs to undergo thorough and strict inspection before leaving the factory, effectively avoiding the generation of bubbles and pinholes. The squeegee has good solvent resistance and wear resistance, and has a wide variety of varieties, and has various hardnesses, shapes and sizes for a wide range of choices. Squeegee Standard SR is suitable for general silk screen printing. It is a PU squeegee with good solvent resistance and abrasion resistance. The single-layer SR1 has a wide range of applications, and is generally the most economical and practical for solvents or industries that do not require high abrasion resistance. The SR is melt-cast from a centrifuge. This fully computer-controlled process not only avoids the generation of air bubbles and small holes, but also ensures advanced technology of the quality of the squeegee from start to finish. In addition, each squeegee needs to undergo a comprehensive and strict quality control before leaving the factory.
Cleaning: First wipe off too much ink with a cloth, then use a soft cloth to wash with a suitable solvent. Do not use strong solvents, especially ink thinner to clean the squeegee. The squeegee should be left idle after grinding or before use to completely evaporate the solvent.
Grinding: Grinding can be carried out in a general-purpose manner: belt type, roller type, knife cutting type. Only dry squeegee can be ground. After grinding, it can not be wiped with solvent immediately.
Storage: During the medium and long-term storage, the squeegee should be wrapped and placed in a dry and cool room to avoid direct light irradiation. Otherwise, the performance and hardness of the squeegee will change. Please confirm the color and hardness with the shopkeeper before the shoot, otherwise it will not be shipped!
| Product Name | Fimor SR1 Screen Printing Squeegee |
| Product size | 50*9*3660 40*7*3660 35*5*3660 30*9*3660 25*5*3660 |
| Product hardnesss | 55, 60, 65 degrees (red) 70 degrees (white) 75 degrees (green) 80 degree (white) 85 degrees (blue) 90 degrees (brown) |
| Knife shape | flat , sharp, oblique |
| Product use | The strip used in screen printing enables ink to flow through the screen and form a pattern on the substrate. |
|
|
FIMOR silk screen printing single layer wear-resistant squeegee (scraping) scraper 50*9*3660 65-85 degrees Images
|
